Table des Matières
Publicité
MAINTENANCE SCHEDULE
After use in an extreme environment (mud and water) and at
annual inspection of all bearings, please remember that the
bearings cannot be re-greased like snowmobile bearings. If
they need to be serviced, replace the wheel completely.
Some of the components (i.e. 134 mm wheels) need a
special tool for servicing. Please use appropriate tools to
avoid any damage to your component.
CAUTION: When pressure washing the track systems, care
must be taken to keep the water stream away from wheel
bearing seals and rubber caps.
CAUTION: If stabilizer rubber cone bores show sign of wear
and oval deformation, they must be replaced along with the
bolt and washer.
CAUTION: Hub bearings should be checked, and replaced as
needed. Bearings that make noise and restrict rotation of hub
are indications that they must be replaced.
CAUTION: Stabilizing rod and spring should be greased with a
lubricant like motorcycle chain lube or its equivalent.
39
WARNING
Publicité
Table des Matières
