Table des Matières
Publicité
INSTALLATION, REMOVAL AND RE-INSTALLATION
To avoid any injury to your hands during manipulation of
the systems, we recommend handling the systems with
hands placed on the frame at the positions shown in the
figure below.
Installation
Execute all tasks described in Installation Guidelines of the
vehicle model. Then, proceed to adjust the angle of attack,
alignment and track tension as described in this manual. Test
drive the ATV and the adjustments must be verified a second
time after the first use, re-adjust as required.
Removal
CAUTION: Leaving anchor brackets attached to suspension
arms when the ATV rides on wheels can result in grave
damage to the vehicle. Never leave components other than the
skid plate and foot rest reinforcement parts.
Using a lifting device, raise the ATV and install appropriate
stands. Ensure that the vehicle is immobilized and safe to work
on.
15
WARNING
Publicité
Table des Matières
