Table des Matières
Publicité
ADJUSTMENTS
Verifying your adjustments on the system is mandatory
after the first use of the vehicle, the track tension,
alignment and angle of attack of the each track system
must be re-verified. Incorrect adjustments can decrease
the performance of the system and create premature wear
of certains components
NOTE: To make the following adjustements, position the vehicle on a
flat and level surface
Angle of attack for front tracks systems
To obtain the correct angle of attack on front tracks systems,
perform the following:
• Use handlebars to point tracks straight ahead.
• Temporarily apply pressure to the front of the track to
make sure that it stays flat on the ground.
• Stabilizing arm (1) must be attached to the front anchor
bracket (2) installed on the vehicle. See Figure 3.
Figure 3
IMPORTANT
ADJUSTMENTS
18
Publicité
Table des Matières
