Moulinex I Companion Touch XL Mode D'emploi page 74

PROBLEMS
Excessive vibration.
Faint noise during
operation
Loud noise during operation Using the wrong accessory
Leakage via the cover.
Leakage from the bowl
spindle or the XL base ac-
cessory.
The blades have difficulty
rotating.
Smell coming from the
motor.
Security message rity rity mes mes mes mes mes
display
CAUSES
The appliance is not placed on a
flat surface; the appliance is not
stable.
Volume of ingredients is too large. Reduce the amount of ingredients.
Wrong accessory.
The spindle for your appliance
may emit a sound when operating
at reduced speed or with certain
ingredients (rice, etc.)
Volume of ingredients is too large. Reduce the amount of ingredients.
The lid is not correctly
positioned or locked.
The sealing ring
is not in place.
The sealing ring is broken or
damaged.
Wrong accessory.
The seal is not in the right position. Position the seal correctly.
The seal is damaged.
The locking ring (C6) is not cor-
rectly locked.
The pieces of food are too big
or too hard.
This may occur the first time you
use the appliance, or if there is
overloading due to the volume
of ingredients being too big or
pieces of food being too hard or
too large.
Bowl or lid is incorrectly locked
in place
The lid is locked on the bowl
during the "Cooking without lid"
function
Place the appliance on a flat surface.
Check that you are using the recommended
accessory.
This happens only temporarily and does not
affect the service life of your appliance. The
sound will diminish or disappear with use
of the appliance and after the detachable
spindle has been cleaned a few times (see
"Cleaning the appliance").
Ensure that you are using the appropriate
attachment (e.g. do not use the whisk E3 to
knead or mix dough; use blade E4) . For more
information, refer to the recommendations in
the recipe and to the operating instructions
in this instruction manual.
Lock the lid securely onto the bowl.
Position the sealing ring on the seal holder
and clip the assembly onto the lid.
Change the seal—contact an authorised
service centre.
Check that you are using the recommended
accessory.
Contact an approved service centre.
Lock the ring (C6) correctly.
Reduce the size or volume of ingredients.
Add liquid.
Allow the motor to cool down (around
30 minutes) and reduce the volume of
ingredients in the bowl.
Before switching on the appliance, check
that the bowl is correctly locked on the
motor unit and that the lid is correctly
locked on the bowl. If the problem persists,
contact an authorised service centre.
Unlock the lid before you begin the cooking
programme. If the problem persists, contact
an authorised service centre.
67
SOLUTIONS
EN