Product Information; How It Works; Designs/Guidance Concept; Designs - Phoenix Mecano RK ROSE+KRIEGER EP-II Notice D'assemblage

6.1 How it works

The linear unit is used for linear processing and positioning. The slides are driven into their posi-
tions by a tapped spindle drive. This motion can be effected manually with a handwheel or by an
electric drive. The slides are guided on precision steel pipes.

6.2 Designs/Guidance concept

This linear unit is available in the designs and versions given here.
•
After receiving this linear unit, check the device for possible damage and missing components.
•
Notify RK Rose+Krieger GmbH of any faults found immediately.
The linear unit is delivered ready for operation, but without a control system and without acces-
sories.

6.2.1 Designs

EP-II linear unit pipe system
Version with spindle, individual slides
(trapezoidal threaded spindle)
EPX-II linear unit pipe system
Version with spindle, two slides and tension plate
(trapezoidal threaded spindle)
Spindle versions:
•
Right-handed thread
•
Left-handed thread

6. Product Information

33