Braun Aesculap Orthopaedics Metha Mode D'emploi page 3

Aesculap Orthopaedics
Metha rasp handle
Legend
1 Rasp handle
2 Hammer plate
3 Handle part
4 Pushbutton
5 Spring
6 Locking screw
7 Rasp
Symbols on product
Adhere to instructions for use
Intended use
The rasp handle is used in hip-endoprosthetic
interventions. It holds prosthesis-specific form rasps,
which are driven in and out during the preparation of
the femoral marrow cavity.
Available sizes
Different variants of the rasp handle are available for
different operating techniques, e.g.:
Designation
Metha rasp handle
- for lateral access
- for posterior access
- left angled
- right angled
2
Safe handling and preparation
CAUTION
Federal law restricts this device to sale by or on
order of a physician!
Use of the Metha rasp handle requires precise
knowledge
biomechanical situation at the hip.
Read, follow and keep the instructions for use.
Use the product only in accordance with profes-
sional standards and practices, see Intended use.
Clean the new product either manually or mechan-
ically prior to the initial sterilization.
Store any new or unused products in a dry, clean
and safe place.
Prior to each use, inspect the product for: loose,
bent, broken, cracked, worn, or fractured compo-
nents.
Do not use the product if it is damaged or defec-
tive. Set aside the product if it is damaged.
Replace damaged parts immediately with original
spare parts.
Art. no.
NF180R
NF175R
NF172R
NF173R
in hip endoprosthetics and the