Sigma onyx FIT Mode D'emploi page 45

The 4 main menus of the
ONYX FIT
Your ONYX FIT is classified into 4 main menus – Training,
Time, Memory and Setting.
The symbol and description on the screen indicates where
you are in the main menu. Use the PLUS/MINUS buttons
to change between the individual main menus.
2.2 Key allocation and navigation
principle
The ONYX FIT uses three menu levels. When navigating
through the menus and sub-menus of the ONYX FIT
the user can always refer to the tree diagram in
Chapter 2.1 Function summary.
The menu navigation on the ONYX FIT is made much
simpler by the navigation level. The navigation level
always appears when you press one of the two
upper function buttons. The possible button
functions for the two upper buttons are shown in
the navigation level in order to:
k Move to the next deeper level (ENTER)
k Go back to the next higher level (BACK/OFF)
k Start training (START)
k End training (END)
k Save training (SAVE)
k Start another training phase (SKIP) or move to the
next lap (NEXT).
Confirm the function shown in the navigation level with
another click. Use the two lower buttons PLUS/MINUS
to change between the individual menu options on one
level.
ENGLISH
PAGE 7