6 Operation
Connection
(1)
Voltage supply DC 24 V
(3)
USB/TTL converter
included in part no. 00456352
a)
4-pin cable box (straight) M12 × 1 with 2 m PVC cable, part no. 00404585 or
4-pin angled socket M12 x 1 with 2 m PVC cable, part no. 00409334
b)
Transmitter cable, part no. 00507861
c)
PC interface cable (gray), included in (3)
NOTE!
During installation, the driver for the USB/TTL converter is also installed on the PC.
1. Install the software setup program on the laptop/PC.
2. Screw-fit the transmitter cable (b) to the connector on the pressure switch (2).
3. Connect the USB/TTL converter (3) to the transmitter cable (b) and PC interface cable (gray) (c).
4. Connect the PC interface cable (gray) (c) to the laptop (4).
5. Connect cable (a) to the power supply (1) and the transmitter cable (b).
20
(2)
(a)
(1)
DC 24 V
(3)
(b)
(2)
Pressure switch, type 405054
(4)
Laptop/PC
(c)
(4)