The following outputs are available, depending on the version:
•
1 PNP switching output
•
2 PNP switching outputs
•
1 PNP switching output + 1 analog output 4 to 20 mA
•
1 PNP switching output + 1 analog output 0 to 20 mA
•
1 PNP switching output + 1 analog output 0 to 10 V
The device can be set directly on-site or configured via a setup program using a PC.
2.3
Block diagram
Pressure
Rotary encoder
Rotate and press
Voltage supply
DC 12 to 30 V
Interface
Setup program
LCD display
2× 4 characters
Switching output 1
Open Collector
Option
Switching output 2
Open Collector
or
Analog output
0(4) to 20 mA or 0 to 10 V
2 Introduction
7