Setting The Switching Delay (B.dly) - JUMO DELOS HP Notice De Mise En Service

Setting
1. Unlock the device.
 chapter 7.2 "Unlocking the device (enter the code).", page 23
2. "Turn" until "B.HYS" appears in the bottom line.
3. "Press" (- flashing, B.HYS static)
NOTE!
The value is entered "digit-by-digit"!
7.14

Setting the switching delay (B.DLY)

Setting range:
Default setting:
Setting
The switching delay is not effective for all switching edges. Only applies for JUMO DELOS SI and JUMO
DELOS HP.
1. Unlock the device.
 chapter 7.2 "Unlocking the device (enter the code).", page 23
2. "Turn" until "B.DLY" appears in the bottom line.
3. "Press" (- flashing, B.DLY static)
NOTE!
The value is entered "digit-by-digit"!
0.00 to 99.99 s
0.00 s
7 Startup
33