Setting The Switching Function (B.fct); Hysteresis (Switching Differential) - JUMO DELOS HP Notice De Mise En Service

7 Startup
7.10

Setting the switching function (B.Fct)

7.10.1

Hysteresis (switching differential)

1. Unlock the device.
 chapter 7.2 "Unlocking the device (enter the code).", page 23
2. "Turn" until "B.Fct" appears in the bottom line.
3. "Press"
Hysteresis normally open contact (switching differential) = upper limit value (default setting)
Hysteresis (normally closed contact) (switching differential) = lower limit value
Relay behavior
• Hysteresis, N/O contact
• Hysteresis, N/C contact
(1) Switching point (Sp)
(3) Hysteresis (switching differential)
(5) N/C contact
30
1
p
1
0
1
0
2
1 1
0
0
1 1
0
0
(2) Release point (RSp)
(4) N/O contact
3
t
4
5