Binary Output 1; Binary Output 2 - JUMO DELOS HP Notice De Mise En Service

6 Operation
6.4.3

Binary output 1

Parameter
Switching function
(only with switching output)
Switching point
(only with switching output)
Release point
(only with switching output)
Hysteresis
(only with switching output and
configured switching point or
release point)
Switching delay
(only with switching output)
a
The default setting is highlighted in bold.
6.4.4

Binary output 2

Parameter
Switching function
(only with 2nd switching out-
put)
Switching point
(only with 2nd. switching out-
put)
Release point
(only with 2nd. switching out-
put)
Hysteresis
(only with 2nd. switching out-
put and configured switching
point or release point)
18
Display Setting range
Closing hysteresis
Opening hysteresis
Normally open contact window
Normally closed contact window
see chapter 7.10 "Setting the switching function
(B.Fct)", page 30
0.00 to 100.00% of the nominal measuring range
see chapter 7.10 "Setting the switching function
(B.Fct)", page 30
0.00 to 100.00% of the nominal measuring range
see chapter 7.10 "Setting the switching function
(B.Fct)", page 30
0.00 to 100.00% of the nominal measuring range
see chapter 7.10 "Setting the switching function
(B.Fct)", page 30
Note:
Application exclusively with window switching
functions.
0.00 to 99.99 s
see chapter 7.10 "Setting the switching function
(B.Fct)", page 30
Display Setting range
Closing hysteresis
Opening hysteresis
Normally open contact window
Normally closed contact window
see chapter 7.10 "Setting the switching function
(B.Fct)", page 30
0.00 to 100.00% of the nominal measuring range
see chapter 7.10 "Setting the switching function
(B.Fct)", page 30
0.00 to 100.00% of the nominal measuring range
see chapter 7.10 "Setting the switching function
(B.Fct)", page 30
0.00 to 100.00% of the nominal measuring range
see chapter 7.10 "Setting the switching function
(B.Fct)", page 30
Note:
Application exclusively with window switching
functions.
a
a