MINN KOTA ULTREX Instructions D'installation page 6

ASSEMBLY OF MOTOR TO MOUNT
MOUNTING CONSIDERATIONS
It is recommended that the motor be mounted as close to the keel or centerline of the
boat as possible. Make sure the area under the mounting location is clear to drill holes
and install nuts and washers. Make sure the motor rest is positioned far enough beyond
the edge of the boat. The motor must not encounter any obstructions as it is lowered into
the water or raised into the boat when stowed and deployed. Consider a quick release or
adapter bracket with the installation of your motor. To view a list of accessories, please visit
minnkotamotors.com.
TOOLS AND RESOURCES REQUIRED
• #2 Phillips Screwdriver
• (2) #3 Phillips Screwdriver
• 1/4" Allen Wrench
• Drill
INSTALLATION
Assembly of Motor to Mount
1
a. Place the Mount on an elevated, level surface such
as a workbench or the tailgate of a pickup. The
Mount, as removed from the box, should be in the
deployed position.
b. Remove the 5/16" Allen Screw and Lock Washer
from the Mount using the 1/4" Allen Wrench. The
5/16" Allen Screw is located on the opposite end
of the mount from the hinge that opens and closes
when the mount is stowed and deployed.
2
c. Align the Keyways on the inside of the Steering
Module with the End Links on the Mount. Do this
by positioning the Steering Module above the End
Links on the Mount.
d. Lower the Motor Assembly straight down until the
Steering Module is seated.
WARNING
Carefully lower the Steering Module into place to avoid
creating a pinch point between the Steering Module
and Mount.
6 | minnkotamotors.com
• 9/32" Drill Bit
• 7/16" Box End Wrench
• A person to help
with installation
• Torque Wrench
• File or Sandpaper
• Hack Saw
• Marker or Pencil
Deployed Deployed
Stowed Stowed
Steering Steering
Module Module
View accessories
available for your
trolling motor at
minnkotamotors.com.
• 1/8" Flat Screwdriver
• 1/8" Allen Wrench
• Loctite
Allen Screw with Allen Screw with
Lock Washer Lock Washer
Mount Mount
Mount Mount
Keyways Keyways
End Links End Links
©2021 Johnson Outdoors Marine Electronics, Inc.