MINN KOTA ULTREX Instructions D'installation page 27

2
c. When installing with a Solix or Apex, the Built-In
MEGA Side Imaging cable can be plugged directly
into the Solix/Apex fish finder. Plug the Built-in
MEGA Side Imaging cable into the corresponding
connection on the Solix/Apex fish finder.
d. When installing with a Helix, first attach the Adapter
Cable and then plug the Adapter Cable into the
Helix fish finder. The Adapter Cable will only have
one connection that is keyed on the back of the
Helix fish finder. Plug the Adapter Cable into the
only matching keyed connection on the Helix
fish finder.
NOTICE:
Check for compatibility or any required
adapter cables online at minnkotamotors.com. The
cable from the trolling motor can be extended with a
Extension Cable #720081-1
NOTICE:
If any cables need to be routed, please
follow the guidelines in the Routing Connection
Cables section of these installation instructions.
NOTICE:
The connectors are keyed to prevent
reversed installation.
©2021 Johnson Outdoors Marine Electronics, Inc.
FEATURE OvERvIEW AND CONNECTING THE CABLES
10'
found at humminbird.com.
Keyed Adapter Cable Keyed Adapter Cable
for Helix Fish Finder for Helix Fish Finder
Humminbird Solix or Apex Fish Finder
Fourteen Pin Connector Fourteen Pin Connector
Locking Collar Locking Collar
Built-In MEGA Side Imaging Built-In MEGA Side Imaging
from Trolling Motor from Trolling Motor
Humminbird Helix Fish Finder
Fourteen Pin Fourteen Pin
Adapter Cable Adapter Cable
Connector Connector
(Helix ONLY) (Helix ONLY)
Locking Collar Locking Collar
Built-In MEGA Side Built-In MEGA Side
Imaging from Trolling Imaging from Trolling
Motor Motor
NOTICE:
The MKR-MI-1 (1852088) is used on Helix 8, 9,
10, 12 and 15 models.
Solix/Apex Fish Solix/Apex Fish
Finder Connection Finder Connection
Plug directly into Plug directly into
Solix/Apex Fish Finder Solix/Apex Fish Finder
Adapter Adapter
Cable Keyed Cable Keyed
Connection Connection
Plug into Plug into
Helix Fish Helix Fish
Finder Finder
minnkotamotors.com | 27