MINN KOTA ULTREX Instructions D'installation page 26

FEATURE OvERvIEW AND CONNECTING THE CABLES
FEATURE OvERvIEW AND CONNECTING THE CABLES
The cables from the Control Head, for each feature installed on the trolling motor, are separately connected to an output device. Once the
features that may be installed are identified, follow the instructions below to ensure the cables are connected correctly.
Built-In MEGA Side Imaging
MEGA Imaging technology took fish finding into the megahertz frequency for the very first time. Now built-In MEGA Side Imaging+
delivers up to 3X the output of standard Side Imaging
and expanding the side coverage areas, all while improving the crystal clear imagery. Built-In MEGA Side Imaging+ comes available in the
Minn Kota flagship families of trolling motors, including Ultrex and Ulterra, with 200 feet of coverage on either side of your boat. With
Humminbird MEGA imaging sonar built right into the trolling motor, you now have a crystal clear view of what's directly to the left and
right of your boat, without having to manage all of the cables that come with external transducers. The Built-In MEGA SI transducer is
only available on new models equipped from the factory and cannot be added to an existing trolling motor.
The Built-in MEGA SI transducer will provide MEGA Side Imaging to select Humminbird models. All Built-In MEGA SI trolling motors, will
come "Apex and Solix Ready" out of the box. An adapter cable accessory
the connection of any compatible Humminbird Helix fish finder. The MKR-MI-1 is used on Helix 8, 9, 10, 12 and 15 models. See the
Built-In MEGA Side Imaging Compatibility
NOTICE:
You can only view Side Imaging with a MEGA DI or MEGA SI HELIX G2N, G3N or G4N Series model and a required
adapter, or with any SOLIX or APEX Series model. The built-in transducer cannot supply MEGA Imaging to Humminbird models
that do not already have the capability. If you have a G2/G2N, G3/G3N HELIX that is not a MEGA SI or MEGA DI model, you
will still get 2D CHIRP Digital Sonar from the transducer. SOLIX G1 and HELIX G2 and G2N units need to be running the latest
software update to view sonar from motors with Built-In MEGA Imaging. You can get the latest version of software for your fish
finder on humminbird.com. Built-In MEGA Imaging is not supported by HELIX G1 models or other brands of fish finders.
1
a. Place the motor in the deployed position.
b. The Built-In MEGA Side Imaging connector from the
Control Head is a 14 pin connector. Built-In MEGA
Side Imaging is only installed with motors installed
with the i-Pilot Link system. Locate and identify the
correct connection for Built-in MEGA Side Imaging
cable(s), at the base of the Control Head.
NOTICE:
Built-in MEGA Side Imaging is only paired
with i-Pilot Link on either an Ultrex or Ulterra motor.
Built-in MEGA Side Imaging
26 | minnkotamotors.com
. Humminbird improved this technology even further by extending the depth range
®
chart online.
(MKR-MI-1 1852088) is available for purchase that will allow
Control Control
Coil Coil
Head Head
Cord Cord
Mount Mount
i-Pilot Link i-Pilot Link
Built-in MEGA Built-in MEGA
Side Imaging or Side Imaging or
Universal Sonar Universal Sonar
i-Pilot i-Pilot
Link Link
Built-in MEGA Side Built-in MEGA Side
Imaging cable from Imaging cable from
Trolling Motor Trolling Motor
Fourteen Pin Fourteen Pin
Connector Connector
©2021 Johnson Outdoors Marine Electronics, Inc.