Connecting And Configuring The Ab Ethernet/Ip; Safety; General; Connections, Settings And Displays On The Anybus S Ethernet/Ip Bus Module - Fronius AB EtherNet/IP Instructions De Service

Connecting and configuring the AB EtherNet/IP

Safety

General

The AB EtherNet/IP interface is connected and configured on the Anybus-S
EtherNet/IP bus module.
Connections, set-
tings and dis-
plays on the
Anybus S Ether-
Net/IP bus mod-
ule
(1)
(2)
(3)
(4)
(5)
WARNING! An electric shock can be fatal. Before opening the device:
- Move the mains switch to the O position
- Unplug the device from the mains
- Put up an easy-to-understand warning sign to stop anybody inadvertently
switching it back on again
- Using a suitable measuring instrument, check to make sure that electrically
charged components (e.g. capacitors) have been discharged
WARNING! Carrying out work incorrectly can cause serious injury and damage.
The activities described below must only be carried out by trained and qualified
personnel. Observe the "Safety rules" section.
(2)
(3)
Interface to UBST 1 PC board
EtherNet connection socket
TCP/IP configuration switch (not in use)
LED indicator
Anybus-S status indicator
(1)
(5)
(4)
69