Publicité
Les langues disponibles
Les langues disponibles
Each program is defined with:
-number (Prog 1, P01)
-total duration of seasoning cycle (32d=32 days)
-Confirm the required program with
-Press
to come back to main menu.
How to reset a program?
While a seasoning cycle is working, the display shows following information:
Set 1: program 1 in execution
F1: phase 1 in execution
14d: hours/day passed from the start of the program (14 days)
UR55%: internal relative humidity
20 C: internal temperature of the cabinet
There are two options to reset a program:
A) Press
for 3 seconds.
The display shows the label RELOAD and the buzzer makes a sound for 3 seconds.
The cycle is being reset and program restarts from the beginning.
B) Put the board on OFF by pressing
Press
to turn the board on again.
p
Alarms 09
Display of alarms occurred.
-Press
,
-Scroll the main menu with
-Confirm with
-Scroll the memorized alarms list with
Up to 32 alarms with their information can be stored:
-No alarm Stored: the display shows No Data.
-Any alarm stored: the display indicates time (14:21), date (10/10/12) and number of alarm from A01 to A32 (A01).
A01 Black Out
S 14:21
10/10/12
Press
once to visualize:
-end time of alarm (if the alarm has already finished) or the information that it is still running
Press
again to visualize:
-Max temperature (17 C) or min temperature detected during the alarm
Press
to go back to main menu.
SEASONING
P01
32d
Prog.
Set 1
14d
UR55%
for 3 seconds.
until you find the Menu 09 Alarm.
.
39
01
F1
20 C
Publicité
