Error Messages - Tecno-gaz Europa B xp 24 Mode D'emploi

DXLA408 Rev_11
4.6.4.- Atmospheric Pressure Visualisation
Press the
0 1
DO NOT MODIFY!
4.6.5.- Water Charge Selection
Press the
0 1
Press the
Press the
The selected data are storage. Switch off the autoclave by MAINS switch.

5 Error Messages

5.1.- Overview
Messages of error are emphasized through an Alfa-numerical code, consisting in a letter and
three numbers.
The "E" suffix is relative to errors of the operator, which can be corrected by same operator.
The "A" suffix is relative to alarms, irregularities of the autoclave, after having carried out the
remedy, if the problem persists it is necessary to request telephonic assistance.
To reset alarms and errors, maintain pressed the buttons here indicated until the
intervention of a beep:
to the visualisation of the atmospheric pressure stored.
to the water charge selection (default:charging by pump)
to modify in charging by water network
and keep pressing until the "beep" sound.
- 38 -