Switching Off; Language Selection - Tecno-gaz Europa B xp 24 Mode D'emploi

Table des Matières

Les langues disponibles

DXLA408 Rev_11

4.4.- End of Program – Unloading

At the end of a program an acoustic signal warns the operator.

If the cycle has been successfully completed END OF CYCLE is displayed.

Click

and the door is unlocked and may be open.

WARNING !

To avoid injuries take care not to closely approach to the open door, because some hot steam

may be present.

Use protection gloves to manipulate the instruments.

4.5.- Switching OFF

Switch off the MAINS switch.

If you do not switch off, the autoclave waits 60 minutes than enters a Stand By condition, in

witch all indicating Leds and the display are switched off.

To reset the machine click one of the pushbuttons.

4.6.- Programming

Press the

and in the meantime the MAINS switch. Keep pressing

0 1

until on the display the selected language is visualised.

Press the

to modify the language [forward].

Press the

to modify the language [backwards].

4.6.2. - Hour Selection

Press the

0 1

Press the

to the hour visualisation.

to modify the hour [forwards].

to modify the hour [backwards].

- 36 -

Table des Matières