Switching To Another Unit Of Weight - Soehnle 3720 Professional Mode D'emploi

2.4 Switching to another unit of weight

Switching between different units of weight must be enabled in Calibration
Mode (ECAL 1 Position 05 Value = 0)!
Switching between kg and lb is available in the non-approvable version only!
Switching to second unit of weight (e.g. from kg to lb) in UCAL 01 Position 04
Value = 2:
Press and hold the Print button then press the On/Off button for 5 seconds until
 appears.
Press the Print button to store.
Then, use the Tare button to scroll to position 04 and press the Print button to
store.
Use the Tare button to set weighing range 2 then press Print again to store.
Position 05 appears on the display.
Press the Zero button,  appears on the display.
To save the setting and exit, press and hold the Print button then briefly press
the Zero button. The display returns to weighing mode.
Switching between units:
Press the Function key to switch to the other unit.
To re-program the Function key, see Paragraph 1.13.
www.soehnle-professional.com
44