User Programmable Function Key - Soehnle 3720 Professional Mode D'emploi

1.13 User programmable function key

To activate the function key:
Press and hold the Print button and then press the On/Off button for 5 seconds
until  appears.
With the Tare button, raise this value to  and then press the Print button to
store.
Then, use the Tare button to scroll to position 02 and press the Print button to
store.
Function assignments:
Value
1
2
3
4
5
6
7
8
9
10
11
Select the desired function value using the Tare or Function key.
You can use the Zero button to move by one decade from right to left.
Then press the Print button to store. Position 03 appears on the display.
Press the Zero button,  appears on the display.
To save the setting and exit, press and hold the Print button then briefly press
the Zero button. The display returns to weighing mode.
www.soehnle-professional.com
Function
Hold mode
Switch to 2nd unit
Not used
Manual tare input
Temporary tare
Not used
Percentage weighing
Neutral measurement
PLU
PLU control
Formulation
42