Alibi Memory - Soehnle 3720 Professional Mode D'emploi

2.8 Alibi memory

The alibi memory is activated in Setting mode (see separate description
470.702.103 User mode 3720). When the alibi memory has been activated, an
arrow points to the corresponding symbol. The arrow flashes as soon as the
limit value entered for full level indication is reached.
Storing in alibi memory is activated by pressing the Print button
or by computer request. To do this, a print image or computer data set must be
configured appropriately (see separate description 470.508.079 for data
interface).
The alibi memory can be queried (display/print entries) in
Setting mode:
Press and hold the Print button then press the On/Off button for 5 seconds until
 appears.
With the Tare button, raise this value till  appears, then store with the
Print button.
Then, use the Tare button to move to position 03 and press the Print button to
store.
The number of the last stored data set appears. Any data set can be retrieved
by changing the serial number with the arrow keys (Tare / Function key), then
displayed with the Print button. The selected data set is shown in a rolling
display, as follows
Data on the display




 
 
Scroll up or down using the arrow keys (Tare / Function key).
Use the Print button to exit this display mode.
Press the Zero button,  appears on the display.
To save the setting and exit, press and hold the Print button then briefly press
the Zero button. The display returns to weighing mode.
www.soehnle-professional.com
:
Meaning
Serial number of alibi entry
Scales type
Year
Serial number
Gross or net alibi entry
kg
Tare with alibi ID
kg

Serial number of
measuring station
47