X10 Resolution; Switching Between Sets Of Scales (Measuring Stations) - Soehnle 3720 Professional Mode D'emploi

2.6 X10 resolution

The resolution can be increased by a factor of ten by simultaneously pressing
the Print button and the Zero button.
On approvable calibrated scales, the higher resolution appears for 5 seconds or
flashes as long as the buttons are pressed and held – on non-approvable
calibrated scales it appears until the Print button and Zero button are pressed
again.

2.7 Switching between sets of scales (measuring stations)

Professional terminal compact scales can be used to operate 2 analogue
measuring stations (sets of scales).
To switch between measuring stations, press the Change Scales button.
The display indicates the currently selected measuring station (set of scales)
with a triangle at symbol M1 or M2.
www.soehnle-professional.com
46