Yamaha WR450F Manuel D'atelier Du Proprietaire page 544

Å
Å
FRONT BRAKE AND REAR BRAKE
ı
ı
2. Install:
Disc cover 1
G
Bolt (disc cover) 2
G
3. Install:
Caliper 1
G
Rear wheel 2
G
Refer to "FRONT WHEEL AND REAR
WHEEL" section.
4. Tighten:
Pad pin 3
G
5. Install:
Pad pin plug 4
G
Master cylinder kit
1. Clean:
Master cylinder
G
Master cylinder kit
G
Clean them with brake fluid.
2. Install:
Master cylinder cup (primary) 1
G
Master cylinder cup (secondary) 2
G
To master cylinder piston 3.
NOTE:
Apply the brake fluid on the master cylinder
cup.
WARNING
After installing, cylinder cup should be
installed as shown direction. Wrong instal-
lation cause improper brake performance.
Å Front
ı Rear
5 - 20
CHAS
7 Nm (0.7 m · kg, 5.1 ft · lb)
18 Nm (1.8 m · kg, 13 ft · lb)
3 Nm (0.3 m · kg, 2.2 ft · lb)