Cleaning The Interior; Main Components - Modular FCG 051 V Serie Installation-Emploi-Entretien

- Remove the control panel
- Remove and replace the component.
Reassemble all parts. For assembly, proceed in
-
reverse order.
GAS OVEN
REPLACING THE GAS VALVE AND BURNER CONTROL
CARD.
- Remove right panel
- Remove and replace the component.
Reassemble all parts. For assembly, proceed in
-
reverse order.
REPLACING THE BURNER
- Remove inner protection
- Remove the combustion chamber.
- Remove and replace the component.
Reassemble all parts. For assembly, proceed in
-
reverse order.
ELECTRIC OVEN
REPLACING THE HEATING ELEMENT
Remove the rear panel and disconnect the heating
-
element.
- Remove the interior panel
- Remove the water distributor
Undo the screw securing the element to the oven
-
and pull the element out by approx. 10 cm.
Reassemble all parts. For assembly, proceed in
-
reverse order.

19. CLEANING THE INTERIOR

Check the condition of the inside of the appliance.
Remove any built-up dirt.
Check and clean the fumes exhaust system.

20. MAIN COMPONENTS

GAS OVEN
- Gas valve
- MAIN BURNER
- Igniter
- Spark flame control
- Control knob
- Working thermostat
- Safety thermostat
- Lamp
- Timer
- Energy regulator
- DIGITAL THERMOMETER
- engine
ELECTRIC OVEN
- Control knob
- Working thermostat
- Safety thermostat
- Heating element
- Lamp
- Timer
- Energy regulator
- DIGITAL THERMOMETER
- engine
PROGRAMMABLE GAS OVEN
- Gas valve
- MAIN BURNER
- Igniter
- Spark flame control
- Safety thermostat
- Lamp
- engine
- Electronic board
- Encoder
PROGRAMMABLE ELECTRIC OVEN
- Safety thermostat
- Heating element
- Lamp
- engine
- Electronic board
- Encoder
23