Disposal Of Packing And Of The Appliance; Safety Devices; Instructions For Installation; Reminders For The Installer - Modular FCG 051 V Serie Installation-Emploi-Entretien

1. DISPOSAL OF PACKING AND OF THE
APPLIANCE
PACKING
The packing is made using environmentally friendly
materials. The plastic recyclable components are:
the transparent cover, the bags containing the
- instructions manual
Polyethylene - PE).
- the straps (in Polypropylene - PP).
APPLIANCE
The appliance is manufactured 90% from recyclable
metals (stainless steel, aluminium sheet, copper...).
The appliance must be scrapped in compliance with
current regulations governing such disposal.
Make the appliance unusable before scrapping.
It must be disposed of properly.
THE SYMBOL SHOWING A CROSSED-
OUT WASTE CONTAINER ON THE
UNIT OR PACKAGE INDICATES THAT,
AT THE END OF ITS LIFE CYCLE, THE
PRODUCT
SEPARATE FROM OTHER WASTE.
SEPARATE COLLECTION OF THIS UNIT AT THE END OF
ITS LIFE CYCLE
MANUFACTURER.
USERS THAT WISH TO DISPOSE OF THIS APPLIANCE
MUST CONTACT THE MANUFACTURER AND FOLLOW
INSTRUCTIONS TO COMPLY WITH THE SYSTEM
ADOPTED BY THE MANUFACTURER TO ENSURE
PROPER WASTE SORTING AT THE END OF THE
APPLIANCE'S USEFUL LIFE.
PROPER WASTE SORTING
PREVENTING POTENTIALLY NEGATIVE IMPACTS ON
THE ENVIRONMENT AND ON HUMAN HEALTH,
ENCOURAGING THE REUSE AND/OR RECYCLING OF
THE MATERIALS COMPOSING THE EQUIPMENT.
ABUSIVE DISPOSAL OF THE PRODUCT BY THE
HOLDER WILL RESULT IN THE APPLICATION OF
PENALTIES AS PER CURRENT STANDARDS.

2. SAFETY DEVICES

OVEN
SAFETY THERMOSTAT
THE MANUFACTURER WILL NOT BE
LIABLE FOR ANY DAMAGE OR INJURY
RESULTING
OBSERVING THE FOLLOWING RULES.
and nozzles (made
MUST BE COLLECTED
IS MANAGED BY
CONTRIBUTES
FROM FAILURE
The appliance is equipped with a manual reset safety
thermostat that interrupts heating when the
operating temperature exceeds the maximum
permitted value.
To restore appliance operation, remove the control
panel and press the thermostat reset button. This
procedure must only be carried out by a qualified,
authorized technician.
of
INSTRUCTIONS
II.
INSTALLATION

3. REMINDERS FOR THE INSTALLER

THE
Identify the specific appliance model. The model
number is detailed on the packing and on the
appliance dataplate.
The appliance must be installed in a well-ventilated
room.
Installation and conversion to a different type of gas
must be carried out by qualified technicians
authorized by the manufacturer, in compliance with
TO
current safety standards and the instructions in this
manual.
Appliance maintenance and conversion to a different
type of gas must be carried out by qualified
technicians authorized by the manufacturer, in
compliance with current safety standards and the
instructions in this manual.
Do not obstruct any air vents or drains present on the
appliance.
Do not tamper with appliance components.
TO
16
READ THIS MANUAL CAREFULLY. IT
PROVIDES
INFORMATION FOR
INSTALLATION, USE
MAINTENANCE OF THE APPLIANCE.
FAILURE TO COMPLY WITH WHAT IS
PRESENTED BELOW
COMPROMISE THE SAFETY OF THE
EQUIPMENT.
THE MANUFACTURER WILL NOT BE
LIABLE FOR ANY DAMAGE OR INJURY
RESULTING FROM FAILURE
OBSERVING THE FOLLOWING RULES.
FOR
IMPORTANT
SAFE
AND
MAY
TO