Updating The Internal Software - Blackmagic Design Teranex Mini IP Video 12G Manuel D'installation Et D'utilisation

Updating the Internal Software

Occasionally, updates for your Teranex Mini IP Video 12G's internal software will be available on
the Blackmagic Design website. We recommend downloading the software and updating the
internal software so you can benefit from new features and improvements.
The latest software can be downloaded from the Blackmagic Design Support Center at
www.blackmagicdesign.com/support
To update the internal software:
1 Download and install the latest version of Teranex Mini Setup. Refer to the 'settings'
section for information on how to install Teranex Mini Setup.
2 Power your Teranex Mini IP Video 12G.
NOTE It is important to ensure that power is connected to your Teranex Mini
IP Video 12G before connecting a USB cable between the computer
and the unit.
3 Attach a USB cable from your computer to the unit, or connect via Ethernet, and launch
the Blackmagic Teranex Setup utility.
If your Teranex Mini IP Video 12G is not detected, Blackmagic Teranex Setup will report 'no
converter connected' in the title bar. When the unit is detected, the name of the unit and its
image will appear.
If Blackmagic Teranex Setup contains newer internal software than that currently installed in
your Teranex Mini IP Video 12G, it will prompt you to update. Just follow the on screen
instructions to complete the update. Once the internal software update is complete, you will be
able to make adjustments to the unit using the Blackmagic Teranex Setup utility.
Updating the internal Software 35 35