Windows Installation; Changing Settings Using Blackmagic Teranex Setup - Blackmagic Design Teranex Mini IP Video 12G Manuel D'installation Et D'utilisation

Windows Installation

1 Download Blackmagic Teranex software from www.blackmagicdesign.com.
2
Unzip the downloaded file. You should see a Blackmagic Teranex Setup folder
containing this PDF manual and the Teranex setup utility installer.
3 Double click the installer and follow the prompts to complete the installation.
4 When the installation has finished, it will prompt you to restart your computer.
Click 'restart' to complete the installation.
Once the computer has restarted, Blackmagic Teranex Setup will be ready to use.

Changing Settings using Blackmagic Teranex Setup

Once you have installed the Teranex Setup software on your computer, connect the computer
to your Teranex Mini IP Video 12G via USB or an Ethernet cable. Using Blackmagic Teranex
Setup is the most efficient way to manage multiple units on your network.
The first thing you'll see when launching the software is the home page. Here you can select
the unit you want to configure. To change settings, click on the 'settings' icon below the image
of your Teranex Mini IP Video 12G. If you have more than one unit connected to your network or
computer, choose the unit by clicking on the arrows on each side of the home page.
Adjustments will be immediately saved to the unit. This means if power is lost, your settings will
be re-established as soon as the power is restored.
NOTE If you have connected your Teranex Mini IP Video 12G via Ethernet but the unit does
not appear on the home page, you may first need to configure the unit's network settings
via USB. Refer to the 'configure tab' information in this section for more information on
how to change the network settings on your Teranex Mini IP Video 12G.
Blackmagic Teranex Setup lets you update your
Teranex Mini IP Video 12G's internal software and
change settings using a Mac or Windows computer
Settings 16 16