Configuring The Watchdog - Blackmagic Design Duplicator 4K Manuel D'utilisation Et D'installation

Table des Matières

Publicité

Querying and updating configuration information
The "configuration" command may be used to query the current configuration
of the deck:
The server returns the configuration of the deck:
One or more configuration parameters may be specified to change the
configuration of the deck.
To change the current video input:

Configuring the watchdog

The "watchdog" command instructs the deck to monitor the connected client
and terminate the connection if the client is inactive for at least a specified
period of time.
To configure the watchdog:
To avoid disconnection, the client must send a command to the server at least
every {period} seconds. Note that if the period is set to 0 or less than 0,
connection monitoring will be disabled.
configuration↵
211 configuration:↵
video input: {"SDI", "optical"}↵
configuration: video input: {"SDI", "optical"}↵
watchdog: period: {period in seconds}↵
Contrôle à distance via Ethernet
97

Publicité

Table des Matières
loading

Table des Matières