Settings; Installing Blackmagic Teranex Setup - Blackmagic Design Teranex Mini IP Video 12G Manuel D'installation Et D'utilisation

The size of your network can be as small or as large as you need. It's not unusual to find many
units connected to a network with many video sources routed to many destinations. Please keep
reading this manual for more information about the features on your Teranex Mini IP Video 12G,
plus all available settings.

Settings

There are three different ways you can change settings on your Teranex Mini IP Video 12G.
You can use the Blackmagic Teranex Setup administration utility to change settings via Ethernet
or USB, you can use the LCD menu if you have an optional Teranex Mini Smart Panel attached,
or you can use the built in small switches on the unit itself.

Installing Blackmagic Teranex Setup

The Blackmagic Teranex Setup administration software is used to change routing settings and
update your Teranex Mini IP Video 12G with the latest internal software via USB or Ethernet.
You can also change network settings using the setup software via USB.
The software installer is located on the supplied SD card, but we recommend downloading
the latest version from the Blackmagic Design Support Center at
www.blackmagicdesign.com/support/family/broadcast-converters
Blackmagic Teranex Setup can be installed
on Mac and Windows computers
Mac OS Installation
1 Download the Blackmagic Teranex software from www.blackmagicdesign.com.
2 Unzip the downloaded file and open the resulting disk image to reveal its contents.
3 Double click the installer and follow the prompts to complete the installation.
The Teranex setup utility is now installed.
Settings 15 15