Creating An Ip Videohub - Blackmagic Design Teranex Mini IP Video 12G Manuel D'installation Et D'utilisation

Mac OS Installation
1 Double click the installer file from your downloads folder.
2 Follow the install prompts and Mac OS will automatically install the software.
A folder called 'Blackmagic Videohub' will be created within your applications folder containing
the following three applications: Videohub Control, Videohub Setup and Videohub Hardware
Panel Setup.
Windows installation
1 Double click the installer file from your downloads folder.
2 Follow the install prompts and accept the terms in the License Agreement and
Windows will automatically install the software.
Click the Windows Start button and then All Programs>Blackmagic Design>Videohub.
The following three applications are contained within the folder: Videohub Control, Videohub
Setup and Videohub Hardware Panel Setup.

Creating an IP Videohub

To use Blackmagic Videohub Control to make routing changes, you will need to create a
Videohub server on the host computer. This server can then be accessed by any computer or
Blackmagic Videohub control panel on the same network.
To create an IP Videohub using Blackmagic Videohub Setup:
1 Connect your Teranex Mini IP Video 12G units to the network as described in the
getting started section. Also make sure your computer is also connected to the
same network.
2 Launch Blackmagic Videohub Setup.
3 Click on the '+' symbol and select 'Create IP Videohub'.
Use Blackmagic Videohub Setup to create an IP Videohub
so you can route units using Blackmagic Videohub Control
4 Enter a name for the IP Videohub and select the number of inputs and outputs.
For example, 1 input and 1 output if you have 1 source unit and one destination unit
connected to your network.
5 Click 'add'.
Setting up and Routing an IP Videohub 25 25