Blackmagic Videohub Control - Blackmagic Design Teranex Mini IP Video 12G Manuel D'installation Et D'utilisation

Blackmagic Videohub Control

Using Blackmagic Videohub Control provides a fast and intuitive way to view and switch
between multiple sources and destinations. Videohub Control operates on a single video
output at a time, and selecting a destination pushbutton shows which source is connected to
it by illuminating the source pushbutton. To change the source, simply click on a different
source pushbutton.
Videohub Control provides an intuitive, icon-driven
representation of the Videohub connections
Selecting a Videohub
Launch Videohub Control and click 'select Videohub'. If you already have another Videohub
selected, click on the settings icon and choose, 'select Videohub'.
Click on the IP Videohub you just created. You will now see two panels in the software named
'sources' and 'destinations', and your IP Video units will appear in each one.
Of course, in the IP Videohub we created there is only one source and one destination, so they
will always be routed to each other, but if you have more source and destination units
connected, you will see all of them as buttons in both areas and they can all be routed.
You have now set up your IP router so you can route source and destination units using
Blackmagic Videohub Control.
Keep reading for more information on how to customize push buttons, including labels and
icons, and general control features.
Blackmagic Videohub Control 28 28