Setting Up And Routing An Ip Videohub; Installing Blackmagic Videohub Software - Blackmagic Design Teranex Mini IP Video 12G Manuel D'installation Et D'utilisation

Setting up and Routing an IP Videohub
Blackmagic Videohub software lets you set up an IP Videohub and make routing changes using
Blackmagic Videohub Control software, or you can also configure a hardware control panel,
such as a Blackmagic Videohub Master Control or Smart Control, so you can make routing
changes from a rack mounted control panel.

Installing Blackmagic Videohub Software

The Videohub software runs on the latest Sierra version of Mac OS, plus 32 and 64 bit versions
of Windows 10. It can be installed from the SD card supplied with your Teranex Mini IP Video 12G,
however we recommend downloading the latest version of the software from the Blackmagic
Design Support Center at www.blackmagicdesign.com/support/family/routing-and-distribution
To install the Videohub software, double
click the installer and follow the prompts
The Blackmagic Videohub folder contains three
Videohub applications. Videohub Control, Videohub
Setup, and Videohub Hardware Panel Setup.

Setting up and Routing an IP Videohub

24 24