Safety Instructions - GYS GYSDUCTION AUTO Mode D'emploi

Translation of the original instructions

SAFETY INSTRUCTIONS

This manual contains safety and operating instructions, to be followed for your safety.
Please read it carefully before using the device for the first time and keep it in a safe
place for future reference. Read and understand the following safety recommenda-
tions before using or servicing the unit. Any change or servicing that is not specified in
the instruction manual must not be undertaken. The manufacturer is not liable for any
injury or damage caused due to non-compliance with the instructions featured in this
manual . If there is any issue or uncertainty, please consult a qualified individual to ope-
rate the equipment correctly. This machine may only be used to heat ferrous materials
within the limits indicated on the equipment and manual. The operator must observe
the safety precautions. In case of inedaquate or unsafe use, the manufacturer cannot
be held liable for damage or injury. Any other uses not specified in this manual is for-
bidden, and possibly dangerous.The product is semi automatic and requires the pres-
ence of an operator.
This unit can be used by children aged 8 or over and by people with reduced physical,
sensory or mental capabilities or lack of experience or knowledge, if they are properly
monitored or if instructions for using the equipment safely have been read and risks
made aware of. Children must not play with the product. Cleaning and maintenance
should not be performed by an unsupervised child.
Do not use the charger if the mains cable or plug is damaged.
Do not cover the device.
Fire and explosion risks!
• Do not use the device in an explosive atmosphere.
• Keep gas cannisters or other pressurised gas containers away from the induction
heating machine.
Warning, heat and flame risk.
• Do not overheat parts and adhesives.
• Be wary of fire, keep a fire extinguisher is in the vicinity..
• Do not position the machine on, or near flammable surfaces.
• Do not position the machine near flammable materials.
Warning ! Very hot surface. Risk of burns.
• The parts and pieces that have just been heated are hot and may cause burns when
manipulated.
• Do not touch any hot parts with your hands.
• Wait for the parts and pieces to cool down before handling them.
• Check that jewellery (such as wedding rings) or other metal pieces do not get close
to the induction heating machine or the inductor when switched on.
• Remove any jewellery or any metal object from yourself before using this machine
• People with metal implants should not use this machine.
• In case of burns, rinse with water abundantly and see a medi- cal doctor as soon as
possible.
GYSDUCTION AUTO EN
13