Profroid MiniCO2OLcompact Notice D'instructions page 46

INTRODUCTION
1
1.1 GOODS RECEIPT
Verify that the rack has not been damaged during transportation and that no parts are missing (anti vibration mounts, core filters
driers).
Check if the rack is still under nitrogen holding charge pressure at 3 Bar +/-0.5 Bar.
If the rack has been damaged or if the delivery is uncomplete, please establish reserves on the receipt of transport and to confirm
them by letter with acknowledgement of receipt under 48 hours to the transportation company with a copy to PROFROID
If the delivery does not correspond to your order (model of compressors or supply voltage, for example), please contact PROFROID
DESCRIPTION – CONFIGURATION
2
Given that compressor rack are delivered as semi-finished product, as manufacturer we may not be informed of their end use.
A correct use of the compressor rack is always under the end user and/or operator responsibility
The use of the compressor rack must be made according to design pressure (PS) and design temperature (TS) as well as to the
compressor functioning envelope .
2.1 GENERAL DESCRIPTION
Compressor rack made of at least 2 to 6 medium temperature transcritical semi-hermetic pistons compressors and 0 to 4 low
temperature subcritical semi-hermetic pistons compressors installed on a painted frame.
Safe operation :
Electrical box delivered
connected
Adaptability :
Electrical box with
Safe operation :
consumer connection
Semi automatic backup control
as option.
Energy saving : Safe operation :
Variable speed drive Integrated emergency cooling
mounted on MT &
unit (option)
LT compressors
(option)
Easy maintenance :
Front access for all main
components
Safe operation :
Suction acumulator on LT rack
(option).
Easy maintenance :
Safe operation :
Oil separator and Oil receiver. Double filter dryer
line (option).
Energy saving :
Heat recovery module
with several options
available.
Easy maintenance :
Multiple receiver
Cat III or IV PED
from 66 liters to
2 x 300 liters