Table des Matières
Publicité
È
É
CLUTCH
EC4A5000
ASSEMBLY AND INSTALLATION
Push lever shaft
1. Install:
• Push lever shaft 1
• Bolt (push lever shaft) 2
NOTE:
• Apply the lithium soap base grease on the oil
seal lip.
• Apply the engine oil on the push lever shaft.
• Fit the seat plate 3 in the groove a of the
push lever shaft and tighten the bolt (seat
plate).
Clutch
1. Install:
• Primary driven gear 1
• Thrust washer 2
• Clutch boss 3
NOTE:
Apply the engine oil on the primary driven gear
inner circumference.
2. Install:
• Lock washer 1
• Nut (clutch boss) 2
NOTE:
Use the clutch holding tool 3 to hold the clutch
boss.
Clutch holding tool:
YM-91042/90890-04086
È
For USA and CDN
É
Except for USA and CDN
4 - 54
ENG
10 Nm (1.0 m · kg, 7.2 ft · lb)
60 Nm (6.0 m · kg, 43 ft · lb)
Publicité
Table des Matières
