Table des Matières
Publicité
2
3
1
6
2
1
ENGINE OIL REPLACEMENT
4
5
3
3 - 15
ENGINE OIL REPLACEMENT
1. Start the engine and warm it up for several
minutes, and then turn off the engine and
wait for five minute.
2. Place the machine on a level place and
hold it on upright position by placing the
suitable stand under the engine.
3. Place a suitable container under the
engine.
4. Remove:
• Lower engine guard 1
• Bolt (oil tank) 2
• Washer 3
• Oil filler cap 4
• Oil tank drain bolt 5
• Crankcase oil drain bolt 6
• Oil filter element drain bolt 7
Drain the crankcase and oil tank of its oil.
5. Remove:
• Oil hose clamp 1
• Bolt (oil hose)
• Oil hose 2
• Oil strainer 3
6. Inspect:
• Oil strainer
Clogged → Blow.
INSP
ADJ
Publicité
Table des Matières
