Step 5 Joining Dual Installed Units - Monogram ZIR241NPNII Instructions D'installation

Installation Instructions - Dual Retro-Fit Installation

STEP 5 JOINING DUAL INSTALLED UNITS

BOTTOM BACK UNIFICATION
Loosen the two bottom screws of rear access covers of
both units and remove the top screws.
Hang the unification bracket to the bottom screws and
reassemble the screws at the top
Tighten screws to tie units together.
BOTTOM FRONT UNIFICATION
Install the bottom front unification bracket using a 3/8"
driver (4 screws).
TOP UNIFICATION
screws.
reassemble the rear screws.
Bracket
30
Bracket
31-1000190 Rev. 2