Step 7 Reinstall The Front Access Cover; Step 8 Remove Hinges From Door - Monogram ZIR241NPNII Instructions D'installation

Installation Instructions - Reversing the Door Swing
STEP 6 REINSTALL THE
ENCLOSURE (Cont.)
Close the compartment door.
STEP 7 REINSTALL THE FRONT
ACCESS COVER
Put the access cover back onto the unit and secure
with two 1/4" hex head screws.
Access
Cover
1/4" Hex Screws
Verify the two 1/4" hex head screws are assembled
to handle side of the products for both freezer and
fresh food columns.
STEP 8 REMOVE HINGES FROM
DOOR
WARNING
Point Hazard
Door hinges are under tension and should be left in
the open position throughout the reversal process.
Closing the hinge can lead to a finger pinch point
hazard.
Remove 3 screws securing each hinge from the top
and bottom of the door and one screw securing the
support bracket to the door (T-30 Torx)
Move the hinge assembly to the opposite end of the
door - top hinge to the bottom and bottom hinge to
the top. Hinge, L-bracket already attached to hinge,
and support bracket will all move together.
2 shims between the hinge bracket and door will
be moved to the other side
save for installing the hinge.
1/4" Hex
Screws
10
Door Hinge Pinch
Shims
Hinge
Support
Bracket
31-1000190 Rev. 2
-