Turn Off; Lance And Gun; Machine; Water Outlet - Dibo PTL Serie Mode D'emploi

5. Turn off

5.1. Lance and gun

Uncouple the lance and put it away.
Put the operating switch on OFF.
Take the plug out of the socket.
Close the water supply.
Roll up the high and low pressure hoses.

5.2. Machine

Clean when necessary the water filter.
Put the guide away within hand range.

5.3. Water outlet

Clean to own need the water supply.

5.4. Put away machine

See that the machine is parked frost-proof.
5.5. Environmentally safe disposal of used fluids
No fluids (anti-scale product, oil, petrol, diesel, softener, ...) may be disposed randomly because of the environ-
ment! So make sure, if you are user, that the applicable local guidelines for environmentally friendly disposal of
these fluids (without soil pollution) are complied.

5.6. Transport

Pay attention at transport to the following:
Keeps the machine as much as possible horizontal during transport, one prevents that there leaks oil from the
pump. Load the machine using a lift truck, hydraulic loading platform or a hoist.
Lash the machines (if necessary) fixed on the loading platform.

5.7. Transportation at frost

Replace the water sucking hose by a short piece hose and hang it with his end in the anti-frost, so the machine
can suck the anti-frost. Take the lance from the gun and operate the machine.
Spray until there comes anti-frost out of the gun.
The machine is now filled with anti-frost, stop the machine.
Tip: Because the catch of the outgoing anti-frost water, this can be re-used afterwards.
DiBO n.v. 63