Turn Off; Lance And Gun; Machine; Water Outlet - Dibo PTL-S Mode D'emploi

Turn off

LANCE AND GUN

Uncouple the lance and put it away. Put the operating switch on OFF.
Take the plug out of the socket. Close the water supply.
Roll up the high and low pressure hoses.

MACHINE

Clean when necessary the water filter. Put the guide away within hand range.

WATER OUTLET

Clean to own need the water supply.

PUT AWAY MACHINE

See that the machine is parked frost-proof.
ENVIRONMENTALLY SAFE DISPOSAL OF USED FLUIDS
No fluids (anti-scale product, oil, petrol, diesel, softener, ...) may be disposed
randomly because of the environment! So make sure, if you are user, that the
applicable local guidelines for environmentally friendly disposal of these fluids
(without soil pollution) are complied.

TRANSPORT

Pay attention at transport to the following: Keeps the machine as much as
possible horizontal during transport, one prevents that there leaks oil from the
pump. Load the machine using a lift truck, hydraulic loading platform or a hoist.
Lash the machines (if necessary) sound fixed on the loading platform.

TRANSPORT AT NEGATIVE TEMPERATURES

Replace the water sucking hose by a short piece hose and hang it with his end
in the anti-frost, so the machine can suck the antifrost. Take the lance from the
gun and operate the machine. Spray until there comes antifrost out of the gun.
The machine is now filled with anti-frost, stop the machine.
Tip: Because the catch of the outgoing antifrost
water, this can be re-used afterwards.

Service

GENERAL

All maintenance activities must happen at an disconnected machine and hoses
without pressure. Checking the electric components can happen exclusively by
an expert. Exclusively accessories and replacement components which have
been approved by the manufacturer can be used. Directly after the activities all
securities- and protection parts must be assembled, before the machine is put
in functioning. "A golden rule" that contributes to a perfectly working machine
with few problems, is well the following:
A daily control and cleaning of the machine frequently do wonders!
To be able to guarantee a perfectly working system, one has first necessary a
reliable and technical well considered machine, which is then faced secondly
at regular times with a thorough maintenance. Therefore the experience and
the "know-how" of DiBO a technical good working machine is insured and
large maintenance turns can be carried out by experienced DiBO technicians
by means of appointment or maintenance contract, we can suppose in advance
that it is satisfied to these two points.
DiBO 19
E N
T U R N O F F