Scope Of Application - Dibo PTL Serie Mode D'emploi

Stop pin:
Press the stop pin until the motor cuts out. Once the motor has cut out, release the pin „2" and ensure that it
returns to its initial position. Depending upon the model, the battery charge indicator „2" and oil pressure warning
indicator „3" will come on again after the motor comes to a stop. Turn the key to position 0 and remove it.
All the indicator lights must go out.
Note: failure to return the starter key to position "0" may result in the battery being totally discharged.
If operation of the engine is interrupted for any reason, or at the end of the working day, the starter key
should be kept out of reach of unauthorized persons (see also information manual of the motor).

4.10. Scope of application

Efficient high pressure cleaning is achieved by following a few guidelines combined with your own experiences.
Each cleaning job is different and specific, therefore contact DiBO for the best solution in your application sector.
Using cleaning products (if applicable): the surface to clean should be sprayed so the product can act during
some time (do not let it dry!) before cleaning with high pressure jet.
Cleaning agents can increase the cleaning effect if they are used correctly!
Always follow/consider the safety instructions of the used product!
Cold water (high pressure) cleaning: removal of (mild) impurities/pollution and rinsing.
Hot water (high pressure) cleaning (if applicable): the cleaning effect will be such improved through increasing the
temperature (set the temperature experimentally according to the application).
Cleaning via lance with rotating head (if applicable): cleaning method to remove tough layers of dirt.
Cleaning using a steam lance (if applicable): this steam function (by overheating water) is used in 'sensitive' clean-
ing applications (eg: damage sensitive surfaces) where there is stubborn dirt (eg: degreaser) is removed by using
steam.
Please note: this application has high cleaning temperatures and requires various safety measures!
DiBO n.v. 62
Stop pin
Speed adjustment lever
Oil filling cap
LED display and below
the ignition key
Oil filter connection
Oil drain plug