Accessories - EUROTEAM WALKER700CDP Manuel D'utilisation

ACCESSORIES

Your bike may come with some or all of these accessories that require attachment and/or assembly.
Kick Stands
If the kickstand is not mounted to your bicycle, place the bicycle in an upright position against a wall or have someone
hold it upright. Place the kickstand in the bracket mounted on the frame and use a pair of Standard Slip Joint Pliers to
secure the fixing bolt to keep the kickstand in place. Be sure to tighten the fixing bolt securely. Some kickstands use a
top plate to locate the bolt and secure the kickstand using a fixing bolt.
Be sure to tighten the axle nut. The guard will sit between the frame and the axle nut (see Figure 47)
WARNING: The kickstand is designed to support the BICYCLE ONLY; not the bicycle and the rider.
Rear Derailleur Guard
Some 20", 24" and 26" model bicycles come with a rear derailleur guard
to protect the rear derailleur from damage. To install, remove the rear
wheel axle nut on the drive side, install the rear derailleur guard over
the axle with the U-shaped guard pointing down, and retighten the axle
nut. The guard will sit between the frame and the axle nut (see Figure 48).
Other Accessories
For all other accessories, either follow the instructions on the packaging
in order to install or bring your bike to a qualified bicycle shop in order to
have the part safely installed.
Figure 48 Figure 47
112