Commissioning; Preparation - Stiebel Eltron DHE 18/21/24 Utilisation Et Installation

INSTALLATIoN

Commissioning

11. Commissioning

11.1 Preparation

Internal anti-scalding protection via jumper slot
f Install the anti-scalding protection setting jumper in the re- f
quired position (= temperature in °C) on the pin strip.
Jumper position Description
43 For example in nurseries, hospitals, etc.
50
55 Max. for shower operation
60 Factory setting
No jumper Limited to 43 °C
www.stiebel-eltron.com
43
50
55
60
CAUTION Burns
If operating with preheated water, e.g. if using a solar
thermal system, the internal anti-scalding protection and
the temperature limit Tmax, which can be set by the user,
may be exceeded.
f In this case, limit the temperature with an upstream f
central thermostatic valve (e.g. ZTA 3/4).
DHE | 81