INSTALLATIoN
Installation alternatives
13.1 Electrical connection from above on unfinished
walls
140
30
1 Cable entry installation aid
f Prepare the power cable.
f
1 Cable routing
www.stiebel-eltron.com
f Reposition the mains terminal from the bottom to the top. To
1
f Replace the cable grommets.
f Install the cable grommet from the top at the bottom.
f Pull the cable grommet over the cable sheath of the power
f Install the appliance on the threaded studs of the wall
f Push the back panel firmly against the wall. Lock the fixing
f Pull the cable grommets into the back panel until both lock-
f Connect the power cable to the mains terminal.
1
f
do this, undo the fixing screw. Turn the mains terminal with
connecting cables 180° clockwise. Route the cable around
the cable guide when doing so. Secure the mains terminal in
place.
f
f
f
cable.
f
mounting bracket.
f
toggle by turning it 90° clockwise.
f
ing tabs engage.
f
WARNING Electrocution
The connecting wires must not protrude beyond the level
of the mains terminal.
DHE |
85