Stiebel Eltron DHE 18/21/24 Utilisation Et Installation page 68

oPERATIoN
Settings and displays
Menu Description
P 4 Automatic water volume
control – set the volume
in the selected unit
P 5 Temperature unit
P 6 Volume unit
P 7 Time format
P 8 Time setting
P 9 Operating lock
P 10 Reset to factory settings Reset (
P 11 Resetting the consump-
tion values
68 | DHE
Selectable display | Explanations
setting
OFF | 5 | 10 | ... 200 l or With the automatic water volume control, you can preselect a volume
2 ... 52 gal of water, e.g. for filling a bathtub. When the preselected water volume
is reached, the automatic control reduces the flow rate. The automatic
water volume control must be enabled on each occasion prior to fill-
ing the bath.
Example, filling a bath with 80 litres (21 gallons): When the bath has
been filled with 80 litres (21 gallons), the control automatically reduc-
es the flow rate to 4 l/min (1 gpm).
C | F Select the temperature unit for all settings.
L | GAL Select the volume unit for all settings.
24h | 12h Select time format.
--:-- You can set the time using the 12 or 24 hour clock:
- 12 hours from 00:00 - 11:59 = AM | 11:59 - 00:00 = PM
- 24 hours from 00:00 to 23:59
After a power cut, the time needs to be set again.
ON | OFF You can set the operating lock to "ON" or "OFF".
To disable the set operating lock:
f Press and hold "i" for more than 12 seconds.
) You can restore the appliance to its factory settings. "rSEt" is shown
on the display.
f Press "1" and "2" simultaneously and hold for longer than 5 sec-
onds. The display switches to "On" to confirm the reset.
f To confirm "On", press and hold "i" for more than 5 seconds.
Reset ( | ) You can reset the consumption values. "rSEt" is shown on the display.
f Press "1" and "2" simultaneously and hold for longer than 5 sec-
onds. The display switches to "On" to confirm the reset.
f To confirm "On", press and hold "i" for more than 5 seconds.
Symbol |
display
°C | °F
l | gal
AM | PM (only
for 12h)
(only when
ON)
www.stiebel-eltron.com