Stiebel Eltron DHE 18/21/24 Utilisation Et Installation page 78

INSTALLATIoN
Installation
f Seal and insert the twin nipples. f
Making the water connection
2
1
3
24
5 Nm
5 4
1 DHW with tee
2 Gasket
3 Cold water with 3-way ball shut-off valve
4 Strainer
5 Plastic profile washer
f Secure the tee and 3-way ball shut-off valve, each with a flat f
gasket, to the twin nipples.
78 | DHE
2
Material losses
!
The strainer must be fitted for the appliance to function.
f When replacing an appliance, check whether the f
strainer is installed.
Installing the appliance
Note
If you are installing the appliance with flexible pipe con-
nections, also secure the back panel with a screw.
1 Cable entry installation aid
2 Cable grommet
Use the installation aid for easier wiring access through the cable
grommet (see plastic parts set supplied).
f Remove the cable grommet from the back panel. f
1
2
www.stiebel-eltron.com