Cleaning The Device - Rohm DURO-M Traduction Du Manuel D'utilisation Original

8 | Cleaning the Device

8 Cleaning the Device
The must be cleaned with a broom or brush before each assembly and
every time a jaw and workpiece is replaced.
Cleaning with compressed air or a high-pressure cleaner is not permitted.
102 / 280
Skin irritations due to contact with lubricants.
Lubricants may cause irritations in the event of contact with the
skin.
Ø When handling the Lathe chuck, wear safety goggles, long
work clothes and gloves.
Ø Avoid skin contact with lubricants.
CAUTION
B1385260 DURO-M