Complete Cleaning - Rohm DURO-M Traduction Du Manuel D'utilisation Original

8 | Cleaning the Device
8.2

Complete Cleaning

For complete cleaning, the Lathe chuck must be removed from the machine
spindle, completely dismantled, cleaned and reinstalled.
35
1 Body
3 Spiral ring
10 Drilling rotary jaws
12 Funnel grease fitting
30 Cover
104 / 280
Skin irritations due to contact with lubricants.
Lubricants may cause irritations in the event of contact with the
skin.
Ø When handling the Lathe chuck, wear safety goggles, long
work clothes and gloves.
Ø Avoid skin contact with lubricants.
34
30
CAUTION
3 42
1
34 Cover holding screws
35 Locking washers
40 Drives
42 Stud bolts
56 Chuck holding screws
12
40 10
B1385260 DURO-M
56