Environmental And Operating Conditions; Permissible Operating Materials - Rohm DURO-M Traduction Du Manuel D'utilisation Original

3.2.5

Environmental and operating conditions

The is designed for the following environmental and operating conditions:
Ambient medium
Place of use
Vibration speeds
Relative humidity (at +40 °C)
Potentially explosive environments
Ambient temperature at place of op-
eration
Ambient temperature for storage
Dry and wet machining
Pollution of the machine's surroundings caused by the machine itself is per-
mitted. However, perfect operation of the must be ensured and checked
regularly. With each jaw and tool change, the must be cleaned of coarse dirt
with a broom or brush. Cleaning with compressed air is not permitted.
3.2.6

Permissible Operating Materials

The following grease is authorised for the Lathe chuck DURO-M:
▪ RÖHM grease F 80
If a different lubricant to the one specified is used, the clamping force
may be reduced considerably.
B1385260 DURO-M
Product Description | 3
Air, non-corrosive/non-aggressive
fluids and gases
Interior
< 5 mm/s as per DIN ISO 10816-3
< 100 %
Use in very humid conditions leads
to faster corrosion and may shorten
the useful life
No
+5 °C to +60 °C
+5 °C to +60 °C
Wet machining permitted with cool-
ing lubricants
EN
77 / 280